3 Types of well water filters

Before modern plumbing companies could bring water directly into your home, wells were the most common method of getting water. Some homes still use wells to get their water as they might be too far from modern water lines, they may not want them, or they are simply trying to get their well working. Water well repair services vary in price and when it comes to finding out how much is a well water test, it is best to talk to your local water company.

In many cases your water company will be able to tell you how to fix well water, they may be able to answer the question of how to get my well water tested, and they may be able to answer the question of how to get rid of magnesium in well water. In terms of water that you are going to be coming in contact with or potentially drinking, it is always best to take the time to talk with the experts that can help make sure your water is safe. Well water is fine as long as you have it properly tested and treated if necessary.

Well water sediment filters are the type of water filters that are used in making well water safe to drink. Well water sediment filters remove the dirt, the pathogens, the grit, the sand and sediment from the water. It also removes the turbidity in well water. The filters generally remove the sediment from the water before they reach the tap. Compared with the typical home water filter, well water sediment filters are heavy duty. There are three different types of well water sediment filters. These are the pleated sediment filter, string wound sediment filter and polypropylene filters.

The pleated sediment filter for well water is the most common type of well water sediment filters. Generally, it comes in 5 microns, 30 microns and 50 microns. This type of well water sediment filters has the highest capacity. Moreover it can be reused after rinsing. It is however recommended that it is used no more than twice. The reason why it is the most commonly used is that it is effective in water source with high amount of grit, sand and dirt.

Sediment filter for well water

The polypropylene well water sediment filters are generally dual gradient. This means that the filter has different micron rating on the outer layers of the filter than the inside or inner layer. Typically, the outer layers have higher rating while the micron rating decreases at the core. This type of filter is best for water with high coloration. It is also best for water with a lot of grit. The gradient filter enables the water to become clear and it is also very effective in removing the grit from the water.

The string wound filter is almost the same as the pleated filter. It is very effective in removing grit, sand and dirt. It also has high capacity. However what makes this filter different is that it does not last as long. You cannot wash them and reuse them. And compared with the polypropylene dual gradient, the string wound filter does not have different micron ratings. It has the same micron ratings from the core to the outer layer. As such it does not offer the same benefits as the polypropylene dual gradient. It is therefore not advisable for water with high coloration and with a lot of grit.

Well water sediment filters can also remove the odor and the taste that are common in well water. The filter can be installed directly at the pump or at another location, depending on the well and the whole system. For example, it can be installed in the home inlet. It is also possible to select which tap to install the filter. Before installation, it is best therefore to decide where to place the filter. It is also ideal to have the water tested so that you will be able to install the right filter that is perfect for the water from the well.

Leave a Comment

RSS
Follow by Email